What action should be taken when a 'do not lift' tag is attached to gear?

• A. Ignore The Tag And Proceed
• B. Remove From Service And Tag Out; Replace Or Repair Before Reuse
• C. Move Gear To A Different Job
• D. Keep It In Service While Awaiting A Replacement

Answer: (B)

When a gear has a “do not lift” tag, the item is considered unsafe or out of service and must not be used until it has been inspected, repaired, or replaced. The tag is a clear warning to prevent use during lifting operations, protecting people and the load from a potential gear failure.

The correct action is to remove the gear from service and put a tag-out in place, then replace or repair the gear before it can be reused. This approach stops any chance of the gear being accidentally used and ensures there’s an approved fix or replacement documented before it goes back into service.

Ignoring the tag would allow a potentially defective piece to be used, creating serious risk. Moving the gear to another job doesn’t address the underlying issue and can spread danger. Keeping it in service while awaiting a replacement leaves the unsafe condition unresolved, risking failure during a lift.